Install a new relay / loader
If you already have a working webNetwork system and need to add an additional Relay or Server (loader) then the following information can be used.
First, if you did not do your initial install or have never installed webNetwork and do not feel comfortable doing this, please contact your sales representative to set up some consulting time.
If you are comfortable with installing webNetwork and can take down your existing relay / server so you can copy the files from the old server to the new server.
***********************************************
* Common steps for both a new relay or loader *
***********************************************
* If using Linux, substitute c:\stoneware with /usr/stoneware and ignore the webNetwork Service utility and use the /usr/stoneware/util/linux scripts to control startup.
1) Configure additional server with the same os as existing relay / server.
2) Shut down webNetwork on existing relay.
3) Copy the stoneware folder (typically c:\stoneware) from old server to the new server.
4) Download the webNetwork Service utility from: https://helpdesk.lenovosoftware.com/portal/kb/articles/stoneware-utilities-22-8-2017
5) Run the webNetwork Service utility and let it install the service.
6) Delete c:\stoneware\config\stonewareloader.xml
**************************
* Setting up a new Relay *
**************************
1) Run c:\stoneware\bin\webNetwork.exe in a cmd prompt.
*** If using windows 2008 be sure to launch the cmd prompt as administrator
2) Go to the 8090 console and login using the default credentials of admin / stoneware
3) Click the Wizards tab
4) In the drop down select New Relay
5) Click Go for Step 1
6) It will automatically name this server to a unique name, you can leave this or change it, but it needs to be unique.
7) Click Next
8) It will ask for the Service Address, put in the ip address of the main stoneware server (loader)
*** If your existing server is set up for secure RMI then you will need to enable that here also.
9) Click Next
10) Click Save and Restart
The relay will now restart and be ready for New Relay Step 2.
Once the 8090 comes back up :
1) Choose New Relay
2) Click Go for step 2
3) Enter in directory credentials for the server.
4) Select the existing stoneware OU
5) Click Next
6) It will ask for the relay name. This name needs to be unique among all of the relays.
7) Click Next
8) It will ask for the relayuser name and password. Enter in the password you used for other relays.
9) Click Next
10) It will ask for the username and password for the 8090 management console secondary account.
11) Click Next
12) Click Save and Restart
It will run through an install script and attempt to add the directory objects, some of these will already exist from the existing install.
The relay will restart and is ready to finish its configuration.
Look at the following URL to finish the configuration : https://helpdesk.lenovosoftware.com/portal/kb/articles/adding-another-loader-22-8-2017
***************************
* Setting up a new Loader *
***************************
1) Run c:\stoneware\bin\webNetwork.exe in a cmd prompt.
*** If using windows 2008 be sure to launch the cmd prompt as administrator
2) Go to the 8090 console and login using the default credentials of admin / stoneware
3) Click the Wizards tab
4) In the drop down select New Server
5) Click Go for Step 1
6) It will automatically name this server to a unique name, you can leave this or change it, but it needs to be unique.
7) Click Next
8) It will ask what type of directory you wish to connect to.
*** The information for this will come from your existing server
9) Click Next
10) Enter in the ip address of the local server. It will default to 127.0.0.1:1099, change that to the local ip address of this server.
11) Click Next
12) Click Save and Restart
The server will now restart and be ready for New Server Step 2.
Once the 8090 comes back up :
1) Choose New Server
2) Click Go for step 2
3) Enter in directory credentials for the server.
4) Select Install webNetwork objects in an existing container.
5) Click Next
6) It will ask for the OU to install webNetwork into. It will show the full context of where webNetwork will be installed. Verify that is correct.
7) Click Next
8) It will ask for the relay name. This name needs to be unique among all of the relays.
9) Click Next
10) It will ask for the relayuser name and password. Enter in the password you used for other relays.
11) Click Next
12) It will ask for the username and password for the 8090 management console secondary account.
11) Click Next
12) Click Save and Restart
It will run through an install script and attempt to add the directory objects, some of these will already exist from the existing install.
The server will restart and is ready to finish its configuration.
Look at the following URL to finish the configuration : https://helpdesk.lenovosoftware.com/portal/kb/articles/adding-another-loader-22-8-2017
Can't find the KB
Unable to find the KB to address your issue ?
Recent Articles
Change Reset Password Button Text
Change the text of the "Reset Password" button on the UW Login Page How to change the text of the Reset Password button on the Login Page. Login to webNetwork and open webAdmin on your Relay Central Server Expand Customization Center Expand Tenants ...
Remove Reset Password Button From Login Page
Remove the Reset Password Button from the Login Page How to remove the Reset Password button from the Unified Workspace login page. Login to webNetwork and open webAdmin on your Relay Central Server Expand Customization Center Expand Tenants Expand ...
Lenovo Unified Workspace End-of-Life Questions and Answers
As of January 31st 2024, Lenovo Unified Workspace (formerly Stoneware WebNetwork) is no longer supported. This means that we no longer provide licenses, downloads, updates, patches, or technical assistance for this product. If you have any questions ...
How do I determine my Unified Workspace license expiration date?
The best method for determining the licensing information including the expiration date of your Unified Workspace license: Login to your 8090 management console on each server This may take remoting into each LUW server and relay, opening a browser, ...
Lenovo Unified Workspace 7.0.2.13 Released
Highlights of Unified Workspace 7.0.2.13 Before you install: Please view the installation notes here. 7.0.2.13 requires a 7.0 license file. Below is a list of enhancements and fixes released in Unified Workspace 7.0.2.13 Fixed external storage ...
Related Articles
Adding another loader
First thing to do would be to get the 2nd DMZ relay up and running. 2nd would be to set up the new loader/relay. 3rd would be to adjust the relays to talk to the new loader. After that, adjust the DNS servers and virtual webApps to include the new ...
Debug relay startup problems.
1) If you have your loaders clustered, make sure the cluster status is in sync by using the 8090 management console and checking the cluster status. 2) Use the 8090 console on the relay to turn on com.stoneware.client.stonewareclient debug. When the ...
Unable to authenticate Relay user. Multiple authentication exceptions.
When applying a password policy or login policy, customer’s stand-alone relay(s) will not load properly. They are giving an Unable to authenticate Relay user error. ERROR (12/03) 15:05:42 [com.stoneware.service.application.Relay[relay-SWRelay1]]: ...
New Features of webPass
With the release of Unified Workspace (formerly webNetwork) 6.4, there are some new features for webPass. New webPass SSO deploy and update system for installing the webPass browser add-on The webPass add-on is not detected in the browser: webPass is ...
Install wnSSOClient on Windows Server 2003/2008/2012
How do I install the wnssoclient on windows server 2003, 2008/2012? For windows 2003: Copy the wnssoclient.exe and swssolibrary.dll files the c:\windows\system32\ directory on the windows 2003 terminal server. On the stoneware relay: Edit the ...